Product Categories

ARX LEVEL 8

8 Channel Audio Balancer and Level Optimizer

Τhe LEVEL 8 shall be an 8 channel device that electronically converts unbalanced audio signals to balanced signals. A switch on the rear panel shall offer the option of unity gain or -10dB  to +4dB level matching. It shall be mounted into a standard 1 RU all steel chassis with extruded aluminium front panel. All Inputs shall be unbalanced jack connectors, wired Tip + (Hot), Sleeve Ground. All Outputs shall be Balanced 3 pin XLR  type, wired Pin  + (Hot), Pin 3 – (Cold) and Pin 1 Ground. The Signal to Noise ratio shall be -94dB unweighted, and -100 dB A weighted. The Input impedance shall be 100kΩ, and the Output impedance shall be 300Ω. Maximum Input headroom shall be +21dB, and maximum Output Level shall be +26dB. THD shall be 0.025%, 0dB @ 1kHz. AC power range shall be switchable 100 to 120V or 220 to 240V AC, using a standard three pin IEC connector, with built-in fuse and voltage change switch.

  • Input Impedance: 100kΩ Unbalanced
  • Input Headroom: +21dB
  • Input Connector: ¼" Jack
  • Output Impedance: 300Ω Balanced
  • Output Level (max): +26dB
  • Output Connector: Male XLR, wired Pin 1 Gnd, Pin 2 + Hot, Pin 3 – Cold
  • Frequency Response: 10Hz- 20kHz ±0.25dB
  • Signal to Noise Ratio: -94dB unweighted,-100dB weighted
  • Distortion:  .0025% THD, 0dB 1KHz
  • Dynamic Range: 120dB
  • Gain: 0dB Unity, mode switch out,14dB mode switch in (-10dB to +4dB level matching)
  • Power: 100-120/220-240V AC 50/60Hz8VA (8 watts) on 3 pin IEC connector with removable cable.
PRICE EXL VAT: 300,00 €
logo footer

KEM Systems Ltd
All rights reserved © 2013
Design & Implemented Site: ClickMedia

MONDAY / FRIDAY 09.30 - 19.00
4 Krimeas str. Ampelokipi 11526
210 - 67 48 514
This email address is being protected from spambots. You need JavaScript enabled to view it.